Measure - Control - Position
The Magnetic tape consists of 3 components:
A The magnetized, highly flexible plastic tape, connected on the lower side with.
B Magnetic conductable and flexible stainless steel tape. It protects the plastic tape from mechanical damages and is a magnetic short circuit at the same time.This increases significantly the functional security under extreme magnetic influences. In standard both parts A and B are already factory-bonded (by ELGO).
C To keep the flexibility for transport and installation, the third part a stainless, magnetic permeable steel tape is delivered separately. It serves for mechanical protection of the plastic tape, is already equipped with a sticky tape and must be bonded on the magnetic plastic tape after installation.
Working temperature range: | 0 to + 70°C |
Operating temperature range: | - 20 to + 85°C |
Operation height: | max. 2000 m above sea level |
Humidity: | max 80 % (non condensing) |
Linear extension: | L = L x x v |
Coefficient of extension: | 16 x 10–6 1/K |
Bending radius: | minimum 150 mm |
Protection class: | IP67 |
Available widths: | 10 mm +/- 0.2 mm |
20 mm +/- 0.3 mm | |
5 mm +/- 0.1 mm (on request) | |
2 mm +/- 0.1 mm (on request) | |
Thickness: | 1.8 mm +/- 0.1 mm (incl. cover band) |
1.5 mm +/- 0.1 mm (without cover band) | |
max. possible length: | up to 600 m as roll ware |
Pole length: | depends on selected encoder type |
Number of absolute tracks: | depends on selected encoder type |
Influence of external magnets: | External magnetic fields must not exceed 64 mT (640 Oe; 52kA/m) at the surface of the magnetic tape. Higher values will damage or destroy the magnetic tape code. |
