Measure - Control - Position
Put the HWD in that way on the shaft, that the M4 pin screws fit into the prepared fixation drills. Fix the HWD 15 on the shaft by tightening the set screws, provided with a 2 mm socket, which are fastened onto the hollow shaft. Finally fix the two M4 pin screws with the adequate nuts.
Modulation to the spindle:
Calculate the pulse factor corresponding to the spindle pitch according to the following scheme:
spindle pitch/ 1250 Example: 5mm
pitch: 50/1250 = 0.04
List the charged factor in the register No. 8
Max. speed | 2.5 m/s |
Resolution | 0.1 mm |
Storage temperature | 0... +70 °C |
Humidity | non condensing, |
Operating height | max. 2000 m over NN |
Display | LCD, 8 mm, 6 segments, |
Power supply | 1.5 V DC (built-in battery) |
Consumption | < 1 mA (at 1.5 V) |
Keyboard | membrane, keypad |
Protection class | IP 43 (mounted) |
Operation temperature | 5... +50 °C |
Dimensions | W x H x D =72 x 114 x 61.5 mm |
Shaft diameter | 20 mm |
Axial load | 20N max. |
Radial load | 200N max. |
Speed | 1500 rpm max. |
