Measuring | Positioning | Control

Sensors

Shaft Information Systems for the lift industry

Magnetic length and angle measuring systems

up to 1/10 resolution

Magnetic length and angle measuring systems

up to 1/1000 resolution

Rotative measuring systems

Absolute

LIMAX Shaft Information Systems

LIMAX02 M
Absolute measurement of the car position

For hoisting heights up to 130 m | Speeds up to 4 m/s

LIMAX02
Absolute measurement of the car position

For hoisting heights up to 260 m | Speeds up to 10 m/s

LIMAX22 DUE
Absolute, redundant measurement of the car position

For hoisting heights up to 260 m | Speeds up to 10 m/s

LIMAX SAFE Shaft Information and Safety System

LIMAX33 RED
Absolute, redundant recording of the car position.

For hoisting heights up to 260 m | Speeds up to 10 m/s

LIMAX44 RED
Absolute, redundant recording of the car position for the highest buildings.

For hoisting heights up to 1,500 m | Speeds up to 18 m/s

SAFE BOX
Electronic evaluation unit in which safety-relevant switching and control functions are implemented

LIMAX34 SAFE
Mo
dular system consisting of the LIMAX33 RED sensor and the SAFE BOX.

For hoisting heights up to 260 m | Speeds up to 10 m/s

LIMAX44 SAFE
Modular system consisting of the LIMAX44 RED sensor and the SAFE BOX

For hoisting heights up to 1,500 m | Speeds up to 18 m/s

LIMAX33 CP
Shaft information system based on the LIMAX33 RED sensor for safe position detection. The safety-related switching and control functions are integrated in the sensor housing.

For hoisting heights up to 260 m | Speeds up to 10 m/s

Absolute

LIMAX1
For industrial applications with a resolution of 1 mm and measuring lengths up to 1000 meters

IMAX
Autoreferencing, absolute measuring system with a resolution of 1 mm and measuring lengths up to 1000 meters

Incremental

LMIX series
For angular and linear measurements, with 0.1 mm (0.025 mm) resolution.

GMIX2
Suitable for long distances,  with 2.5 mm resolution.

DMIX1 / DMIX3
1.0 mm resolution, up to 10 mm distance between sensor and magnetic tape possible.

RMIX2
Low-cost length and angle measuring system, with 0.1 mm (0.025 mm) resolution.

KMIX2
Round sensor with 0.1 mm (0.025 mm) resolution.

Absolute

EMAX / EMAX2
Absolute, contactless measuring. EMAX2 with LED and SSI error bit if the distance between sensor and tape gets too large. Resolution  0.01 mm, for measuring lengths up to 20 meters.

EMAX-HI
Magnetic absolute length measuring system for highly dynamic controls

FMAX
Absolute, guided measuring. Resolution 0,01 mm.

Incremental

EMIX series
Ideal for angular and linear measurements, with 0.01 mm resolution.

EMIX23
High Precision Length Measuring System with selectable resolution up to 0.001 mm (1 µm). 

LMIX22
High precision length measuring system with selectable resolution up to 0,025 mm (2,5 µm).

FOW/FLW
Precision carriage for incremental measurements with pre-installed, selectable measuring system.  

GMIX1A
With speed monitoring and 5 adjustable resolutions. 

PMIX
Guided Length Measuring System with a mechanical cylinder with resolutions from 0,1 mm to 0,001 mm. 

EMSC1/3, LMSC1/3
Magnetic-based Length Measuring System with sin/cos signal output. 

SMIX
Magnetic-based Length Measuring System with integrated Push-Pull signals for MIN/MAX-limit switches. 

GSI2
Guided Measuring System for use in press brakes with a resolution of up to 0,00122 mm.    

Absolute

EMAX-RO
Magnetic absolute encoder. High resolution: 16,000 mesauring steps/rev.

RMAX1
Single-Turn-Encoder. Resolution of 12 bit over the whole measuring distance.

INAX1
Single Axis Absolute Inclinometer. Measuring range 0° to 90° with analog output 0,5 - 4,5 V.

INAX2
3 Axes Absolute Inclinometer with high resolution. Measuring range 0° to 90° +/- with 0,025° resolution.

Incremental

MIRE
Suited for rotative angular measurement. Wearfree due to contactless measuring principle. Up to 10 000 revolutions/minute.

Magnetic Rings
Space-saving and reasonably priced option to rotary encoders. Insensitive against environmental influences. Can be used with all standard incremental ELGO sensors.

Type 15.22
Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, robust design, IP64.

Type 15.32
Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, IP54.

Type 15.37
Incremental Encoder up to 500 pulses/revolution, with 10 mm steel shaft, IP54.

Type 15.42
Incremental Encoder up to 1000 pulses/revolution, with 12 mm steel shaft, IP66

Type 15.62
Hollow Shaft in miniature structural shape, IP54

Inclinometers

Absolute

INAX1
Single axis absolute
inclinometer: +/- 90°
with Analogue output 
0.5 - 4.5 V

INAX2
High resolution 3 axis
absolute inclinometer:
+/-90°, +/-90° / +/-180°
with 0,025° resolution