Absolute

REMAX
Autonomously referencing, absolute magnetic length measuring system. For measuring lengths up to 12 meters.

LIMIX01 MINI
Small and compact design. For heights up to 40 meters.

LIMAX02
Absolute position and speed measurement. For measuring lengths up to 260 meters.

LIMAX22 DUE
Increased safety due to a double sensor array in one housing.

LIMAX33 RED
Redundant double sensor with integrated monitoring.

LIMAX33 SAFE
Measuring and evaluating. The system performs safety-relevant functions and replaces several switches and monitoring systems of the classical elevator.

LIMAX44 HIGHRISE
For heights up to 1.000 meters and a travel speed up to 16 m/sec.

Safe Box
Safety monitoring for elevators. TÜV tested according to SIL3.

Breaktronic
Low-cost safety monitoring for lifts. Ideal for retrofitting in existing elevators.

Incremental

LIMIX
Low-cost length measuring system for the lift-industry

Absolute

LIMAX1
For industrial applications with a resolution of 1 mm and measuring lengths up to 1000 meters

IMAX
Autoreferencing, absolute measuring system with a resolution of 1 mm and measuring lengths up to 1000 meters

Incremental

LMIX series
For angular and linear measurements, with 0.1 mm (0.025 mm) resolution.

GMIX2
Suitable for long distances, with 2.5 mm resolution.

DMIX1
1.0 mm resolution, up to 10 mm distance between sensor and magnetic tape possible.

RMIX2
Low-cost length and angle measuring system, with 0.1 mm (0.025 mm) resolution.

Absolute

EMAX / EMAX2
Absolute, contactless measuring. EMAX2 with LED and SSI error bit if the distance between sensor and tape gets too large. Resolution 0.01 mm, for measuring lengths up to 20 meters.

FMAX
Absolute, guided measuring. Resolution 0,01 mm.

Incremental

EMIX series
Ideal for angular and linear measurements, with 0.01 mm resolution.

EMIX23
High Precision Length Measuring System with selectable resolution up to 0.001 mm (1 µm).

LMIX22
High precision length measuring system with selectable resolution up to 0,025 mm (2,5 µm).

FOW/FLW
Precision carriage for incremental measurements with pre-installed, selectable measuring system.

GMIX1A
With speed monitoring and 5 adjustable resolutions.

PMIX
Guided Length Measuring System with a mechanical cylinder with resolutions from 0,1 mm to 0,001 mm.

EMSC1/3, LMSC1/3
Magnetic-based Length Measuring System with sin/cos signal output.

SMIX
Magnetic-based Length Measuring System with integrated Push-Pull signals for MIN/MAX-limit switches.

GS-I
Guided Measuring System for use in press brakes with a resolution of up to 0,00122 mm.

Absolute

INAX1
Single Axis Absolute Inclinometer. Measuring range 0° to 90° with analog output 0,5 - 4,5 V.

INAX2
3 Axis Absolute Inclinometer with high resolution. Measuring range 0° to 90° +/- with 0,025° resolution.

Incremental

MIRE
Suited for rotative angular measurement. Wearfree due to contactless measuring principle. Up to 10 000 revolutions/minute.

Magnetic Rings
Space-saving and reasonably priced option to rotary encoders. Insensitive against environmental influences. Can be used with all standard incremental ELGO sensors.

Type 15.22
Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, robust design, IP64.

Type 15.32
Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, IP54.

Type 15.37
Incremental Encoder up to 500 pulses/revolution, with 10 mm steel shaft, IP54.

Type 15.42
Incremental Encoder up to 1000 pulses/revolution, with 12 mm steel shaft, IP66

Type 15.62
Hollow Shaft in miniature structural shape, IP54