RMIX2 Incremental Measuring System Measurement of Lengths, Positions, Angles and Rotational Speed
- For length- and angle measuring
- Resolution up to 0.025 mm (at 4-edge triggering)
- High protection class IP67
- Distance sensor-tape up to 0.6 mm
- Standard pole rings: 72 mm, 38 mm und 19.75 mm (diameter)
- Integration of Hall-Sensor technology and interpolation as single-chip
- Very robust against dirt
Product inquiry
Mechanical data
| Measuring principle | incremental - rotative |
| Repeat accuracy | ± 1 increment |
| System accuracy in µm at 20 °C | ± (25 + 20 x L), L= measuring length in meters |
| Distance sensor / tape | max. 0.6 mm |
| Sensor housing material | ABS plastic |
| Housing dimensions (L x W x H) | 50 x 12 x 25 mm |
| Required magnetic tape | MB20-20-10-1-R resp. pole ring: 72, 38 or 19,75 mm (diameter) |
| Pole pitch | 2 mm |
| Max. measuring length | theoretically unlimited |
| Connections | open cable ends |
| Sensor cable | 1.5 m standard length, others on request, drag chain suitable |
| Sensor cable bending radius | 60 mm |
| Weight | approx. 40 g without cable, cable: approx. 60 g/m |
ELEcTRICal DatA
| Power supply voltage | 10 ... 30 VDC or 5 VDC |
| Residual ripple | 10...30 VDC: <10 %, 5 VDC: ± 25 mV |
| Current consumption | 10 … 30 VDC: max. 150 mA, 5 VDC: max. 200 mA |
| Output signals | A, A', B, B', Z, Z' |
| Output levels | HTL or TTL |
| Output current per channel | max. 20 mA |
| Resolution (at 4 edge evaluation) | 0.025 mm |
| Index pulse | every 4 mm (periodically), |
| Max. output frequency per channel | 200 kHz |
| Max. operating speed | 20 m/s |
| Max. rotation speed | 300,000 rpm / number of pole pairs |
Environmental conditions
| Storage temperature | -25 ... +85 °C |
| Operating temperature | -10 ... +70 °C, -25... +85 °C on request |
| Humidity | 95 %, non-condensing |
| Protection class | IP67 |