IZ17E Misurazione e sistema di visualizzazione sistema senza cablaggio con encoder incrementale
- grande display LCD di due righe (altezza delle cifre rispettivamente 12,6 e 8,5 mm)
con sensore incrementale (2,5 mm / 5 mm) - segno ± , segni speciali e simboli universali
- con indicatore dello stato della batteria
- simbolo "°“ per visualizzare l'angolo
- installazione semplice (clip o cornice di montaggio)
- versione con sensore assoluto AZS disponibile
- versione con sensore incrementale e assoluto possibile (per es. misura lineare assoluta con correzione angolare incrementale)
- interfacce opzionali: RS-232, RS-485, RF-868 MHz
MECHANICAL DATA
| Housing | norm panel housing |
| Housing material | ABS-PC plastic, black |
| Housing dimensions (W x H) | 96 x 48 mm |
| Panel cut out (W x H) | 92 x 45 mm |
| Keyboard | foil with short stroke keys |
| Istallation depth (without connector) | 25 mm |
| Installation depth (complete) | approx. 60 mm |
ELECTRICAL DATA
| Display | 8 digit LCD (digit height 8.5 mm) or 7 digit LCD (digit height 12.6 mm) with sign, battery state and measurement units |
| Perspective | 12 o'clock |
| Measurement units | mm / inch / m / ° |
| Accuracy | ± 1 digit |
| Power supply voltage | battery (1.5 V resp. 3 V), integrated or external. 24 V on request |
| Current consumption | < 1 mA at 1.5 V (with measuring system) |
| Battery Service life | 1 ... 5 years (depending on battery type) |
| Optional interfaces | RS-232, RS-485, RF-868 MHz |
| Connections | standard: fixed cable outlet, optional: round connector |
| Data memory | Flash |
ENVIRONMENTAL CONDITIONS
| Operating temperature | 0 ... +50 °C |
| Storage temperature | -10 ... +60 °C |
| Humidity | max. 80 %, non-condensing |
| Protection class (front) | IP54 |
| Protection class (rear) | IP40 |
MAGNETIC SENSOR
| Type designation | MS-250 |
| Dimensions (L x W x H) | 30 x 10 x 15 mm |
| Measuring principle | magnetic, incremental |
| Required magnetic tape | MB-20-25-10-1-R |
| Magnetic tape pole pitch | 2.5 mm |
| Distance sensor/ tape | max. 0.8 mm |
| Resolution | 0.1 ... 0.01 mm |
| Repeat accuracy | ± 2 increments |
| Operation speed | max. 4 m/s (depending on battery type) |
| Housing material | zinc die cast |
| Protection class | IP67 |
| Connections | fixed connection with indicator or optionally with round connector |
| Sensor cable | drag-chain suitable, 6-wire, twisted pairs and double-shielded |
| Sensor cable length | 0.1 ... 2.0 m |
| Sensor cable bending radius | min. 60 mm |
| Weight | approx. 30 g |
| Humidity | max. 95 %, non-condensing |
| Influence of external magnetic fields | external magnetic fields > 1 mT, which directly impinge upon the sensor, can affect the system accuracy. |
FLYER
SHORT INSTRUCTION
MOUNTING INSTRUCTION
Integrated battery case, fixed cable outlet
Integrated battery case, round connector
steckbare Schraubklemme, fixed cable outlet
steckbare Schraubklemme, round connector