P4011 Controllo per 1 asse POSIZIONATORE COMPATTO
Il controllo P4011 è predisposto per applicazioni semplici di posizionamento nella costruzione di macchinari ed è stato pensato per una maggiore economicità.
La parametrizzazione risulta tramite un testo chiaro nel menù grafico.Di serie il P4011 offre anche altre funzioni come la correzione degli errori di misura, la compensazione di errori del mandrino e le correzioni degli strumenti.
- Display LCD
- Azionamento manuale
- Modalità a passo singolo
- Uscite relais
- Uscite di commutazione digitali (opzionali)
MECHANICAL DATA
Housing | panel housing |
Housing material | front plate: aluminium, housing: galvanized steel sheet |
Front plate dimensions (W x H) | 144 x 144 mm |
Housing dimensions (W x H) | 136 x 136 mm |
Panel cut out (W x H) | 138 x 138 mm |
Keyboard | foil, short stroke keys |
Installation depth | 40 mm (without connectors), 74 mm (with connectors) |
ELECTRICAL DATA
Display | LCD dot matrix 120 x 80 pixels with white background lighting |
Hardware | 32 bit microcontroller with 1 MByte flash and 56 KByte RAM |
Program memory | up to 100 steps, more on request |
System accuracy | ± 1 increment |
Power supply voltage | 24 VDC +10/-20 % |
Current consumption | max. 150 mA (unloaded), permitted total current (incl. self-consumption): 1 A |
Encoder supply voltage | 24 VDC or 5 VDC |
Load by encoder / measuring system | max. 130 mA |
Input signals (measuring system) | HTL, TTL, analog (order designation) |
Signal channels | A, B, Z, resp. A, A', B, B', Z, Z' or analog 0 ... 3.3 V (order designation) |
External inputs | 16 x digital PNP inputs, assignment and logic are freely programmable |
Input current / pin | max. 10 mA |
Min. pulse time for inputs | 300 ms |
Max. input frequency | 100 kHz, higher on request |
Analog inputs | optionally 1 ... 2 analog inputs (12 bit) at 3.3 VDC measuring system supply |
Output signals | 16 digital PNP outputs, assignment and logic (active high/low) are freely programmable |
Output current | max. 15 mA per output / 500 mA total current across all outputs, the outputs are durable short circuit proof (no multiple short circuits) |
Freewheel clutch/outputs | for inductive loads integrated (clamping voltage at the output max. -45 V) |
Analog outputs | optional: ± 10 V PID or ± 10 V unregulated (each 12 bit) |
Connections | industry standard connectors (3.81 mm grid, lockable) and additional RJ45 sockets (depending on version) |
Power down memory | E²Prom (service life: 1.000.000 switching on/off cycles or 40 years) |
Further options | 8 = only 8 instead of 16 digital in- and outputs |
Accessories | NG13 power pack (primary: 115/230 VAC secondary: 24 VDC /600 mA), relay card RP8 with 8 changeover relays (28 VDC/250 VAC / 12 A), interface cable |
ENVIRONMENTAL CONDITIONS
Operating temperature | 0 ... +45 °C |
Humidity | max. 80 %, non-condensing |
Protection class (front) | IP43 (installed state) |