IZ16E Misurazione e sistema di visualizzazione incrementale senza cablaggio
- display LCD a 7 posizioni
- alimentato a batteria e simbolo "°" per visualizzare l'angolo
- facile da montare con custodia snap-in (compatibile con Z16)
- modo di visualizzazione parametrabile: rappresentazione in mm/ pollici con frazione
- direzione di conteggio regolabile
- posizione del punto decimale e del fattore di moltiplicazione regolabile
- blocco della tastiera
- possibilità di impostazione del valore di riferimento
- commutazione fra misura incrementale e assoluta
- 3 disallineamenti regolabili
- 2 ingressi esterni per funzioni speciali via RJ45(opzionale)
- 2 uscite esterne via RJ45 (opzionale)
- interfaccia: RS-232 / RS-422 / RS-485
MECHANICAL DATA
Housing | norm panel housing |
Housing material | plastic, black |
Housing dimensions (W x H) | 96 x 72 mm |
Panel cut out (W x H) | 93 x 67 mm |
Keyboard | foil with short stroke keys |
Installation depth (complete) | min.30 mm, depends on version |
ELECTRICAL DATA
Display | 7 digit LCD (digit height 14 mm), with sign, battery status and measurement units |
Perspective | 12 o'clock |
Measurement units | mm / inch / m / ° |
Accuracy | ± 1 digit |
Power supply voltage | battery (1.5 V resp. 3 V), integrated or external. 24 V on request |
Current consumption | < 1 mA bei 1.5 V (with measuring system) |
Battery Service life | 1 ... 3 years (depending on battery type) |
External inputs | 2 x 5 ... 30 V (on request) |
External Outputs | 2 x 30 V open collector (on request) |
Optional interfaces | RS232 (SN100), RS485 (SN150), RF 868 MHz (SN600) |
Connections | fixed cable outlet, optional: round connector |
Data memory | Flash |
ENVIRONMENTAL CONDITIONS
Operating temperature | 0 ... +50 °C |
Storage temperature | -10 ... +60 °C |
Humidity | max. 80 %, non-condensing |
Protection class (front) | IP54 |
Protection class (rear) | IP40 |
MAGNETIC SENSOR
Type designation | MS-250 |
Dimensions (L x W x H) | 30 x 10 x 15 mm |
Measuring principle | magnetic, incremental |
Required magnetic tape | MB-20-25-10-1-R |
Magnetic tape pole pitch | 2.5 mm |
Distance sensor/ tape | max. 0.8 mm |
Resolution | 0.1 ... 0.01 mm |
Repeat accuracy | ±2 increments |
Operation speed | max. 4 m/s |
Housing material | zinc die cast |
Protection class | IP67 |
Connections | fixed connection with indicator or optionally with round connector |
Sensor cable | drag-chain suitable, 6-wire, twisted pairs and double-shielded |
Sensor cable length | 0.1 ... 2.0 m |
Sensor cable bending radius | min. 60 mm |
Weight | approx. 30 g |
Humidity | max. 95 %, non-condensing |
Influence of external magnetic fields | external magnetic fields > 1 mT, which directly impinge upon the sensor, can affect the system accuracy. |
FLYER
SHORT INSTRUCTION
OPERATION MANUAL
IZ16E-000 (standard) (English)