IZ16E Measurement and Display System Incremental Measurement and Visualization without wiring
The battery powered IZ16E system consists of a large 7 digit LCD display and an incremental magnetic sensor (resolution 0.1 mm) for position measurement. No wiring required.
- 7 digit LCD display with sign and special characters
- Battery status and angle display
- Easy mounting via snap-in housing (compatible to Z16)
- Configurable display-modes: mm / m/ inch with fraction display
- Adjustable counting direction
- Adjustable decimal point and multiplication factor
- Keylock
- Adjustable reference value
- Switch-over between incremental and absolute measuring
- 3 adjustable tool offsets
- Optional: 2 external inputs for special characters via RJ45
- Optional: 2 external outputs via RJ45
- Available interfaces: RS232 / RS485 / RF868 MHz
> IZ16E-600 with additional 868 MHz radio module
Product inquiry
MECHANICAL DATA
| Housing | norm panel housing |
| Housing material | plastic, black |
| Housing dimensions (W x H) | 96 x 72 mm |
| Panel cut out (W x H) | 93 x 67 mm |
| Keyboard | foil with short stroke keys |
| Installation depth (complete) | min.30 mm, depends on version |
ELECTRICAL DATA
| Display | 7 digit LCD (digit height 14 mm), with sign, battery status and measurement units |
| Perspective | 12 o'clock |
| Measurement units | mm / inch / m / ° |
| Accuracy | ± 1 digit |
| Power supply voltage | battery (1.5 V resp. 3 V), integrated or external. 24 V on request |
| Current consumption | < 1 mA bei 1.5 V (with measuring system) |
| Battery Service life | 1 ... 3 years (depending on battery type) |
| External inputs | 2 x 5 ... 30 V (on request) |
| External Outputs | 2 x 30 V open collector (on request) |
| Optional interfaces | RS232 (SN100), RS485 (SN150), RF 868 MHz (SN600) |
| Connections | fixed cable outlet, optional: round connector |
| Data memory | Flash |
ENVIRONMENTAL CONDITIONS
| Operating temperature | 0 ... +50 °C |
| Storage temperature | -10 ... +60 °C |
| Humidity | max. 80 %, non-condensing |
| Protection class (front) | IP54 |
| Protection class (rear) | IP40 |
MAGNETIC SENSOR
| Type designation | MS-250 |
| Dimensions (L x W x H) | 30 x 10 x 15 mm |
| Measuring principle | magnetic, incremental |
| Required magnetic tape | MB-20-25-10-1-R |
| Magnetic tape pole pitch | 2.5 mm |
| Distance sensor/ tape | max. 0.8 mm |
| Resolution | 0.1 ... 0.01 mm |
| Repeat accuracy | ±2 increments |
| Operation speed | max. 4 m/s |
| Housing material | zinc die cast |
| Protection class | IP67 |
| Connections | fixed connection with indicator or optionally with round connector |
| Sensor cable | drag-chain suitable, 6-wire, twisted pairs and double-shielded |
| Sensor cable length | 0.1 ... 2.0 m |
| Sensor cable bending radius | min. 60 mm |
| Weight | approx. 30 g |
| Humidity | max. 95 %, non-condensing |
| Influence of external magnetic fields | external magnetic fields > 1 mT, which directly impinge upon the sensor, can affect the system accuracy. |