Z60 indicatore di posizione / contatore Indicatore di posizione universale programmabile per 3 assi

  • indicatore di posizione con ingressi di segnale da 1 a 3 assi
  • ingressi per encoder rotativo convenzionale nonché per sistemi di misurazione ELGO (incrementali o assoluti)
  • valore di riferimento, disallineamento e spessore della lama della sega regolabili
  • ingresso di controllo digitale configurabile per ogni asse
  • modalità di funzionamento per impulso, velocità e scorrevolezza
  • due uscite a relé e due uscite digitali
  • uscita analogica come opzione disponibile
  • memoria dati durante un'interruzione dell'alimentazione 
  • interfaccia seriale RS232
  • versione quasi assoluta Z60-014 con cavo batteria ricaricabile integrato

 

Richiedi prodotto

mechanical data

Housingnorm panel housing
Housing materialaluminium
Housing dimensions (W x H)96 x 72 mm
Panel cut out (W x H)93 x 67 mm
Keyboardfoil with short stroke keys
Installation depth33 mm (without connectors)

electrical data

Displaygraphic LCD display 120 x 180 pixels 
Perspective6 o'clock
Measurement unitsmm, m, Inch, RPM oder °
Accuracy± 1 digit
Power supply voltage 24 VDC ± 20 %
Current consumption120 mA (without measuring system)
Encor supply24 VDC  or 5 VDC (order designation)
Load by encor/ measuring systemmax. 300 mA
Singnal inputsHTL, TTL, or RS422 (order designation)
Signal channelsA, B, Z bzw. A, A', B, B', Z, Z' or RxD+, RxD-
Maximum input frequency100 kHz, 500kHz on request
External inputs 3 control inputs (24 V, PNP)
Analog inputsoptional: 0 ... 10 V or 0 ... 20 mA on request
Relay outputs2 potential free shutters (24 VDC / max. 1 A)
External outputs2 open drain outputs
Analog outputsoptional: 0 ... 10 V or 4 ... 20 mA
InterfacesRS232
Connectionspluggable screw terminals and 9 pin female D-SUB (for third axis)
Power down memoryFRAM
optional accessoriesexternal power pack NG24.0

environmental conditions

Operating temperature0 ... +50 °C
Storage temperature

-40 ... +70 °C

Humiditymax. 80 %, non-condensing
Protection class (front)IP43 (installed state)
Protection class (rear)IP40

Mechanical Data indicator

Housingpanel housing
Housing materialaluminium
Housing dimensions (W x H)72 x 96 mm
Panel cut out (W x H)67 x 93 mm
Keyboardfoil with short stroke keys
Installation depth100 mm (with connectors) resp. 37 mm (without connectors)

electrical Data indicator

Displaygraphical LCD (80 x 120 pixel)
Measurement unitsmm or Inch
Accuracy± 1 digit
Power supply voltage14 ... max. 30 VDC
Reverse polarity voltageintegrated
Current consumptionmax. 600 mA (incl. sensor load)
External inputs3 control inputs 24 V, PNP
External outputs3 control outputs 24 V, PNP
InterfaceRS485 for communication with PLC
Connections1 x 5-pin and 1 x 9-pin Phoenix connector;
3 x 7-pin M9 round connector (sensors)
Power down memoryFRAM for parameters
Battery operating timesensor supply up to 6 or 12 weeks after power-off (depending on selected mode)
Battery standby currentapprox. 160 µA
Optional accessoriesNG24.0 (external power supply)

mechanical daten (Sensor MS2060)

Housing materialzinc die cast
Dimensions (L x W x H)

30 x 10 x 15 mm

Measuring principlemagnetic, quasi-absolute
Required magetic tapeMB20-50-10-1-R 
Magnetic tape pole pitch5.0 mm
Distance sensor - tapemax. 2.0 mm
Max. measuring lengththeoretically unlimited
Operating speednormal mode: max. 2.0 m/s
enery safe mode: max. 0.5 m/s
Connections3 screwable 7-pin M9 round connectors
Sensor cabledrag-chain suitable, 6-wire, twisted pairs and double-shielded
Sensor cable lengthe2.5 m (standard), others on request
Cable bending radiusmin. 60 mm
Weight (without cable)approx. 30 g (cable approx. 60 g/m)

electrical data (Sensor MS2060)

Resolution0.01 mm
Repeat accuracy

±0.05 mm

System accuracy ±(25 + 20 x L), L=measuring length in ,eter

environmental conditions entire system

Storage temperature-20 ... +70 °C
Operating temperature

0 ... +50 °C

Humiditymax. 80 %, non condensing
Protection class indicatorfront: IP43 (installed)
rear: IP20
Protection class sensorIP67
Influence of external magetic fields on the magnetic sensorexternal magnetic fields > 1 mT, whicj directly impinge upon the sensor, can affect the system accuracy

FLYER

Flyer Z60-000

Flyer Z60-014

MANUALE OPERATIVO

Z60-000

Z60-014

QUICK GUIDE FOR FDT SOFTWARE UPDATE TOOL

Z60 FDT-Software-Update-Tool