P40T Touch Screen Positioning Control Programmable Multi Axis Position Controller

  • TFT- display with touch operation
  • Manual function
  • Single set operation
  • Program memory
  • Digital outputs up tol 2A
  • Analog outputs
  • Material depending gap, angle and pressure calculation
  • Cut automat
  • Sheet support
  • Sheet return
Product inquiry

MECHANICAL DATA

Housingpanel housing
Housing materialfront plate: aluminium, housing: galvanized steel sheet
Front plate dimensions (W x H)180 x 144  mm
Housing dimensions
(W x H)
136 x 136 mm
Panel cut out (W x H)138 x 138 mm
Keyboardtouchscreen
Installation depth48 mm (without connectors), 83 mm (with connectors)

 ELCTRICAL DATA

DisplayTFT touch screen monitor
Hardware32 bit microcontroller with 1 MByte flash and 128 KByte RAM
Program memoryup to 1.000 steps, more on request
System accuracy± 1 increment
Power supply voltage24 VDC +10/-20 %
Current consumptionmax. 200 mA (unloaded), permitted total current (incl. self-consumption): 1A
Encoder supply voltage24 VDC or 5 VDC
Load by encoder / measuring systemmax. 130 mA
Input signals (measuring system)HTL, TTL, analog (order disignation)
Signal channelsA, B, Z, resp. A, A', B, B', Z, Z' or analog 0 ... 3.3 V (order designation)
External inputs16 x digital PNP inputs, assignment and logic are freely programmable
Input current / pinmax. 10 mA
Min. pulse time for inputs300 ms
Max. input frequency100 kHz, higher on request
Analog inputsoptionally 1 ... 3 analog inputs (12 bit) at 3.3 VDC measuring system supply
Output signals16 digital PNP outputs, assignment and logic (active high/low) are freely programmable
Output currentmax. 2 A per output / 8 A total current across all outputs, the outputs are durable short circuit proof (no multible short circuits)
Freewheel clutch/outputsfor inductive loads integrated
(clamping voltage at the output max. -36 V)
Analog outputsoptional: ± 10 V PID or
± 10 V unregulated (each 12 bit)
Interfacesoptional: RS232
Connectionsindustry standard connectors (3.81 mm grid, lockable) and additional RJ45 sockets (depending on version)
Power down memoryE²Prom (service life: 1.000.000
switching on/off cycles or 40 years)
Further options8 =  only 8 instead of 16 digital in- and outputs
N = digital inputs as NPN version
AccessoriesNG13 power pack (primary: 115/230 VAC
secondary: 24 VDC /600 mA), relay card RP8 with 8 changeover relays (28 VDC/250 VAC / 12 A), P40 (T) interface cable /Art. No: 820137012)

ENVIRONMENTAL CONDITIONS

Operating temperature-0 ... +45 °C 
Storage temperature-20 ... +50 °C
Humiditymax. 80 %, non-condensing
Protection class (front)IP43 (installed state)
Protection class (rear)IP00

OPERATION MANUAL

P40T

 QUICK GUIDE

FDT Basic-Tool | Backup-Tool