LMIX1 | LMIX2 Incremental Measuring Systems Space-saving Incremental Linear Encoders for dynamic applications

  • Resolution 0.025 mm  (at 4-edge triggering)
  • Repeat accuracy 0.025 mm
  • Speedproportional output of square-wave signals

LMIX1

  • Smallest type of construction
  • with externeal electronic evaluation unit

LMIX2

  • Small sensor with integrated eletronic evaluation unit      
  • Index impuls output
  • The installation of the sensor can be effected horizontaly or verticaly (option)
Product inquiry

Mechanical data

Measuring principle incremental
Repeat accuracy ± 1 increment
System accuracy in µm at 20 °C

± (25 + 20 x L), L= measuring length in meters

Distance sensor / tape max. 2.0 mm
Sensor housing material zinc die cast
Housing dimensions (L x W x H) 30 x 10 x 15 mm
Required magnetic tape MB20-50-10-1-R
Pole pitch 5 mm
 Max. measuring length theoretically unlimited
Connections 9 pin D-SUB
Sensor cable 1.5 m standard length, others on request, drag chain suitable
Sensor cable bending radius 60 mm
Weight sensor + D-SUB: approx. 40 g

ELEcTRICal DatA

Power supply voltage 10 ... 30 VDC or 5 VDC
Residual ripple 10...30 VDC: <10 %, 5 VDC: ± 25 mV
Current consumption 10 … 30 VDC: max. 150 mA, 5 VDC: max. 200 mA
Output signals A, A', B, B', Z, Z' 
Output levels HTL or TTL
Output current per channel max. 20 mA
Resolution (at 4 edge evaluation) 0.025 mm
Index pulse every 5 mm (periodically),
Max. output frequency per channel 100 kHz
Max. operating speed 5 m/s
Max. rotation speed 300.000 U/min per number of pole pairs

Environmental conditions

Storage temperature -25 ... +85 °C
Operating temperature -10 ... +70 °C, -25... +85 °C on request
Humidity 95 %, non-condensing
Protection class IP67

Mechanical data

Measuring principle incremental
Repeat accuracy ± 1 increment
System accuracy in µm at 20 °C

± (25 + 20 x L), L= measuring length in meters

Distance sensor / tape max. 2.0 mm
Sensor housing material zinc die cast
Housing dimensions (L x W x H) 30 x 12.5 x 25 mm
Required magnetic tape MB20-50-10-1-R
Pole pitch 5 mm
 Max. measuring length theoretically unlimited
Connections open cable ends
Sensor cable 1.5 m standard length, others on request, drag chain suitable
Sensor cable bending radius 60 mm
Weight approx. 35 g, each without cable, cable: approx. 60 g/m

ELEcTRICal DatA

Power supply voltage 10 ... 30 VDC or 5 VDC
Residual ripple 10...30 VDC: <10 %, 5 VDC: ± 25 mV
Current consumption 10 … 30 VDC: max. 150 mA, 5 VDC: max. 200 mA
Output signals A, A', B, B', Z, Z'
Output levels HTL or TTL
Output current per channel max. 20 mA
Resolution (at 4 edge evaluation) 0.025 mm
Index pulse every 5 mm (periodically), optionally as reference pulse
Max. output frequency per channel 100 kHz
Operating speed 5 m/s
Max. rotation speed 300.000 U/min per number of pole pairs

Environmental conditions

Storage temperature -25 ... +85 °C
Operating temperature -10 ... +70 °C, -25... +85 °C on request
Humidity 95 %, non-condensing
Protection class IP64, higher on request

 

FLYER

Flyer LMIX1

Flyer LMIX2

OPERATION MANUAL

LMIX1

LMIX2