HMIX1X measuring system with 0.001 mm resolution with 1 µm resolution ideal for precision motor feedback
- 1 µm resolution
- High measuring accuracy
- Periodic index pulse or freely definable reference pulse possible
- Direct non-contact measurement
- Insensitive to dust, dirt and water
Mechanical DATA
| Measuring principle | incremental |
| Repeat accuracy | ±1 µm |
| System accuracy in µm at 20 °C | ±(15 + 20 x L); L= measuring length in meters |
| Distance sensor / tape | max. 0.2 mm or 0.5 mm when used without magnetic band |
| Sensor housing material | zinc die cast |
| Housing dimensions (L x W x H) | 38 x 11 x 15 mm |
| Required magnetic tape | MB20-10-10-1-R |
| Pole pitch | 1 mm |
| Max. measuring length | theoretically unlimited |
| Connections | open cable ends, optionally with connector |
| Sensor cable | 1.5 m standard length, others on request, drag chain suitable |
| Sensor cable bending radius | 60 mm |
| Weight | approx. 35 g without cable, cable: approx. 60g/m |
ELEcTRICal DatA
| Power supply voltage | 5 VDC |
| Residual ripple | ±25 mV |
| Current consumption | max. 200 mA |
| Output signals | A, A', B, B', Z, Z' |
| Output levels | TTL |
| Output current per channel | max. 20 mA |
| Resolution (at 4 edge evaluation) | 0.001 mm |
| Index pulse | every 1 mm periodically |
| Max. output frequency per channel | 1 MHz, higher on request |
| Max. operating speed | 2 m/s |
Environmental conditions
| Storage temperature | -25 ... +85 °C |
| Operating temperature | -10 ... +70 °C, -25 ... +85 °C on request |
| Humidity | 95 %, non-condensing |
| Protection class | IP67 |